To remove salt stains from leather boots, brush off the dry salt, then wipe the marks with a soft cloth dampened in one part white vinegar to two parts water, after testing it on a hidden spot. Wipe the whole panel, not just the mark, so you do not leave a fresh tide line, then wipe with plain water, let the boots dry slowly at room temperature stuffed with paper, and finish with a leather conditioner, because salt and vinegar both dry leather out. On suede, use the same mix sparingly, dab rather than wipe, and brush the nap once dry.
Why does salt leave white marks?
The salt spread on winter pavements dissolves in slush and soaks into your boots. As the leather dries, the water leaves and the salt stays behind as white, wavy tide lines. Salt also draws moisture and natural oils out of leather, so marks left for weeks can stiffen it and lead to cracks along the creases. Treat them the same day if you can.
What do you need?
- a soft brush
- two soft, clean cloths
- white vinegar and water
- plain paper or kitchen roll for stuffing (newsprint can mark pale linings)
- a leather conditioner or cream
- a protector for the boots' material
How do you clean salt off smooth leather?
- Brush off the dry salt. If the boots are wet, let them dry naturally first.
- Mix one part white vinegar to two parts water in a bowl. Guides range from equal parts to one in three, so start with the milder mix, and check the maker's care instructions if the boots came with any.
- Test it on a hidden spot, such as the inside of the boot near the heel. Let it dry and check the colour has not darkened or come off on the cloth.
- Dip a cloth, wring it out well, and wipe the marks with light strokes, working outwards across the whole panel to the seams.
- Wipe again with a cloth dampened in plain water, to take off the vinegar.
- Stuff the boots with paper and leave them to dry at room temperature, away from radiators, fires and direct sun. Change the paper if it gets damp. Heat dries leather too fast and can crack it.
- Repeat once if white marks reappear as the boots dry. Salt often comes out in layers.
Why should you condition them afterwards?
Salt has already taken oils out of the leather, and vinegar and water take a little more. Once the boots are completely dry, rub a thin layer of leather conditioner or cream into them with a soft cloth in small circles, paying attention to the creases. Let it soak in, buff off the excess, then polish if you like. Finish with a leather protector or wax before you wear them again.
Advertisement
What about suede and nubuck?
The same vinegar mix works, but suede and nubuck mark easily with water.
- Brush first with a suede brush to lift loose salt.
- Dab, do not wipe, with a cloth that is barely damp with the mix.
- Let them dry slowly, stuffed with paper.
- Brush the nap once dry, and use a suede eraser on anything left.
- Spray with a suede protector before the next wear.
Our guide to cleaning suede shoes and boots covers water marks and grease too.
What about other kinds of boots?
- Patent leather: wipe with a damp cloth, dry and buff. It does not absorb salt the way ordinary leather does.
- Faux leather: a damp cloth with a drop of mild soap, then plain water. It needs no conditioner.
- Fabric and canvas: warm water with a drop of mild detergent, then the vinegar mix if marks remain, after a patch test. Rinse and air dry.
- Rubber wellies: wipe with water. A white, powdery film on rubber boots is often bloom, a harmless film that rises to the surface of natural rubber, not salt. It wipes off with a damp cloth, and a product made for rubber boots helps keep it away.
What should you avoid?
- Neat vinegar, which is too strong for leather.
- Soaking leather, or scrubbing it hard.
- Drying boots on a radiator, by a fire or with a hot hairdryer.
- Lots of washing-up liquid on leather, which strips its oils further.
- Mixing vinegar with bleach or any other cleaner. Vinegar and bleach together give off chlorine gas.
- Skipping the conditioner on leather, which leaves it dry and more likely to crack.
How do you stop salt marks coming back?
- Protect your boots before winter with a wax, cream or spray made for their material, and top it up every few weeks.
- Wipe them with a damp cloth after any walk on gritted pavements, before the salt dries in.
- Let them dry naturally, stuffed with paper, and rest them for a day between wears.
- Store them clean and dry. Our guide to storing shoes and boots explains how to keep their shape.
Buying or selling boots with salt marks?
White tide marks on smooth leather often clean off, as long as the leather underneath has not dried out and cracked. Ask the seller for close-ups of the creases across the toes and ankles, where cracking starts. Salt marks on suede are harder to remove completely. Our guide to buying second-hand winter boots covers soles, zips and linings too.
If you are selling, clean and condition the boots before you photograph them. If marks remain, declare them: on Rewear, you can tag a flaw such as "Small mark" or "Scuffs" and show it in a close-up, and give the insole length in cm, the measurement a Rewear listing asks for on shoes. Buyers compare it with their own feet, as our guide to how boots should fit explains.
Advertisement
Find your next piece
Second-hand clothing from sellers across the UK, with measurements in cm where sellers add them and buyer protection at checkout.