REWEAR

Selling

How to sell jumpers and knitwear: fibre, bobbles and fit

How to sell knitwear second-hand: de-bobble first, measure jumpers flat and relaxed, name the fibre exactly, price by fibre and season, and post it folded.

To sell a jumper or any knitwear, de-bobble it first, then lay it flat and measure it relaxed, never stretched: chest pit to pit, length, sleeve and shoulder, in cm. Give the fibre exactly as the composition label says, because buyers search for wool, merino and cashmere and pay more for them. Photograph the knit close up and the places pilling shows first, tag any bobbling left, price by fibre and season, and fold it for posting.

How do you get knitwear ready to sell?

  1. Check the care label, then wash or air the piece; a day by an open window shifts a wardrobe or perfume smell. Our guide to washing and storing knitwear covers the wash.
  2. De-bobble it on a flat surface with a fabric shaver or a de-pilling comb, using light strokes. Go carefully on fine knits, and leave fluffy yarns such as mohair alone, as shaving takes off their halo.
  3. Hold it up to a window and look for holes, especially round the neck, under the arms and along old fold lines, where moths like to feed.
  4. Ease snags through to the back with a crochet hook or a blunt needle. Never cut a pulled loop.
  5. Steam out hanger dents in the shoulders, then fold it.

A small hole is often worth darning first: our guide to mending a hole in a jumper shows how, and a neat repair is fine to sell once declared.

How do you measure a jumper for a listing?

Lay it on a table, smooth it gently with your hand and leave ribbed hems and cuffs as they lie. These are the four a Rewear listing asks for under Jumpers & hoodies:

  • Chest, pit to pit: straight across, armpit to armpit.
  • Length: from the highest point of the shoulder, next to the neckline, down to the hem.
  • Sleeve: from where the sleeve meets the shoulder to the end of the cuff, cuff unstretched.
  • Shoulder: across the back, seam to seam.

Button cardigans before you measure. On a dropped-shoulder jumper, say the shoulder is dropped by design. On a raglan, where the sleeve runs up to the collar, add the sleeve from the centre back of the neck to the cuff.

A knit can be pulled out by several centimetres, which makes it look a size bigger than it is, and under Rewear's Terms a figure more than 2 cm out does not count as accurate. So measure it relaxed, and say so: "Measured flat and relaxed, not stretched."

Why does the fibre matter so much?

Buyers choose knitwear by what it is made of, and many search for it by name: lambswool, merino, cashmere, alpaca, cotton. Give it exactly as the label does, percentages and all:

  • "100% merino wool" tells a buyer what they are getting.
  • "Cashmere blend" can mean anything from mostly cashmere to a few per cent, so write the full composition: "70% wool, 25% nylon, 5% cashmere".
  • If the composition label has been cut out, say so. Do not guess from how it feels, and never call a piece cashmere because it is soft.

Photograph the composition label too. Our guide to telling good cashmere shows what buyers check before they pay more for it.

How honest should you be about bobbles and wear?

Completely, and in words that match the grade. On Rewear, Very good means "worn a few times, no flaws", so a jumper with any bobbling left is Good at best.

  • Light pilling that remains after de-bobbling: tag it "Pilling or bobbling" and show it in a close-up.
  • Holes: tag "Small hole" and give the size and place: "two moth holes on the back, each about 2 mm, photo 6".
  • Darns and repairs: tag "Has been repaired".
  • Cuffs, hems or neck that have lost their spring: tag "Stretched or misshapen".
  • Shrinking or felting: if a wash has thickened or shrunk it, say so, and let the measurements show its real size.
  • Smells that will not shift: tag "Smells of smoke or damp".

A jumper with visible wear all over, but still wearable, is Satisfactory.

What photos sell knitwear?

Buyers check the places our guide to checking second-hand knitwear lists, so show them:

  1. Front and back, laid flat, sleeves straight, in daylight.
  2. A close-up of the knit: the cable, rib or pattern, and the true colour. Marl yarns are hard to capture, so name the shade in words.
  3. The labels: brand, size and composition.
  4. The underarms, sides and cuffs, where pilling shows first.
  5. The jumper held up to the light, which shows a buyer there are no holes, or exactly where they are.

How should you price a jumper?

  • Fibre first. Cashmere, merino, lambswool and alpaca in good condition ask more than acrylic or cotton-mix knits, so put the fibre in the title: "Navy 100% lambswool crew neck, M".
  • Then the knit and the brand. A well-known knitwear brand, or a heavy cable, Aran or Fair Isle knit, holds its value; say a piece is hand-knitted only if you know it is.
  • Then the condition. Compare jumpers in a similar condition: each grade down, and each flaw you tag, comes off the price.
  • Then the season. Wool and chunky knits sell best from early autumn through winter; cotton and lighter knits do well in spring.

How do you post knitwear?

Most jumpers fit the medium parcel size, up to 1 kg, though a chunky cardigan may need large, up to 2 kg, so weigh it packed. Fold it with tissue between the layers and put it in a plastic bag inside the parcel against rain.

If you have found moth holes in anything from the same drawer, seal the jumper in a bag and freeze it for at least two weeks before you post it, so nothing else travels with it.

Ready to sell?

Listing on Rewear is free and there is no selling fee, so the price you agree is the price you are paid.

List something on RewearHow selling works

More from the Rewear blog