To mend a small hole in a jumper, darn it. Stretch the area gently over a darning mushroom or anything round, sew a ring of small stitches around the hole, lay rows of yarn across the hole in one direction, then weave over and under them in the other, working well into the sound knit on every side. Small holes, up to a couple of centimetres, darn neatly at home; bigger ones need a larger darn or a patch. If moths made the hole, deal with the moths first.
What kind of hole is it?
- A ladder, where a dropped stitch is running in a line: catch the loose loop with a safety pin so it stops, then work it back up with a small crochet hook and secure it at the top.
- A split seam, where a seam has come apart but the knit is whole: sew it closed along the seam line.
- A small hole in the knit, from a moth, a snag or wear: darn it.
- A thin patch that has not yet become a hole, often at the elbows: reinforce it with Swiss darning before it goes.
What do you need to darn a jumper?
- A blunt darning or tapestry needle.
- Yarn of a similar weight and fibre: wool for wool, and something fine for a fine knit. You can split a thicker yarn into fewer strands. Some jumpers come with spare yarn on a card attached to the care label.
- Something round to stretch the knit over: a darning mushroom, a tennis ball, a jam jar or an orange.
- Small, sharp scissors.
How to darn a hole in a jumper
- Stretch the hole gently over the mushroom. Keep the knit relaxed rather than taut, or the darn will pucker when you take it off. Many menders work from the inside, so the yarn ends finish out of sight.
- Sew a ring of small running stitches about a centimetre out from the edge of the hole, in sound knit, or further out if the knit around it is thin.
- Lay the rows one way. Stitch straight across the hole from one side of the ring to the other, each row taken into the sound knit beyond it. Keep the rows about a yarn's width apart, and leave a little slack at each turn so the darn can stretch with the jumper.
- Weave the other way. Work across at right angles, over one row and under the next, then under and over on the way back. Push each new row up against the last so the weave is dense enough that you cannot see through it.
- Carry on past the hole into the sound knit on every side, so the darn is anchored to strong fabric, not the frayed edge.
- Finish by running the yarn ends through the back of the darn for two or three centimetres, then trim. There is no need for knots.
- Steam it lightly to help the darn settle.
How do you reinforce a thin patch?
Swiss darning, also called duplicate stitch, traces new yarn over the existing knitted stitches. It strengthens a worn area while looking like part of the jumper.
- Bring the needle up through the point at the bottom of a knitted V.
- Pass it under both loops of the stitch above.
- Take it back down where it came up.
- Repeat along the row, then the next row, until the thin area is covered.
It works best on plain knits, and suits elbows and cuffs.
Advertisement
What is visible mending?
Instead of hiding a repair, you make it a feature: a darn in a bright contrasting yarn, a little embroidery over a hole, or an elbow patch of felted wool or suede sewn on with blanket stitch. It suits jumpers where a perfect colour match is impossible.
What about moth holes?
Deal with the moths before you mend, or the darn will soon be joined by new holes.
- Seal the jumper in a bag and freeze it for at least two weeks, then leave the bag closed for a day. A cool wool wash may not kill the eggs.
- Hold it against a window and check every part for other holes and for thin, grazed patches.
- Darn each hole, and reinforce grazed areas with Swiss darning.
- Store it clean and folded. Our guide to washing, drying and storing knitwear shows how to keep moths away.
Does a mended hole lower the price?
Yes, a little: a neat darn is still a repair, and buyers need to know about it.
If you are selling on Rewear, tag "Small hole" for a hole you have not mended or "Has been repaired" for one you have, and include a close photo of it; where Rewear's photo check spots the flaw, the tag is pinned to that photo. Say where it is and how it was mended: "small darn on the left elbow in matching wool". The condition moves too. Very good means worn a few times with no flaws, so a jumper with a hole or a repair is Good or Satisfactory, depending on how much it shows. Our guide to describing flaws honestly helps with the wording.
If you are buying, a single declared hole in a good wool or cashmere jumper can be a bargain worth mending. Ask for a photo of the jumper against a window first, to make sure it is one hole and not the start of many. For buttons, hems and other quick fixes, see our guide to simple repairs before you sell.
The short version
Darn small holes: a ring of stitches, rows one way, weave the other, anchored in sound knit. Reinforce thin patches with Swiss darning, freeze anything with moths first, and declare any hole or repair when you sell.
Advertisement
Find your next piece
Second-hand clothing from sellers across the UK, with measurements in cm where sellers add them and buyer protection at checkout.