To sell vintage clothing well, say what you know and how you know it. Use the labels, fabric and construction as clues to its age, call it vintage only when you are reasonably sure, and describe every sign of age precisely, with photos. Give every measurement in cm, because old size labels rarely match modern ones, and photograph the labels and the inside, which is where experienced buyers look first.
Vintage buyers expect some wear. What they do not forgive is wear they were not told about.
What counts as vintage?
There is no official definition. Many sellers use "vintage" for pieces around 20 years old or more, and "antique" for much older ones. Two related words:
Advertisement
- Retro or vintage-style: a newer piece made to look like an earlier decade. Do not call it vintage.
- Deadstock: a piece from years ago that was made for sale but never sold or worn. On Rewear that is New with tags (unworn, tags still attached), or New without tags if the tags have gone.
How can you tell how old a piece is?
No single clue proves a date, but two or three that agree make a fair estimate. Look at:
- The labels. As a rule, the more a label tells you, the newer the piece. Older garments often carry just a brand label; later ones add the size, the fibre content, care symbols and where it was made. A piece with no labels at all may be older, or home-made.
- The size label. Some older British pieces give a bust or hip measurement in inches rather than a dress size.
- The brand label's design. Logos, typefaces and label colours change over the years. A search for the brand, "label" and a decade often finds collectors' guides.
- The fastenings. Metal zips are still used today, but a metal zip in the side seam of a dress is a common sign of an older piece. So are hooks and eyes, covered buttons and hand-sewn press studs. Zips do get replaced, so check the stitching round one looks original.
- The construction. Seams finished by hand or with pinking shears, generous seam allowances and hand-stitched hems point to an older or home-made piece. Most later factory clothing has overlocked seams.
Then write the estimate as an estimate, with your reasons: "Probably 1970s, going by the label and the metal side zip."
If you are not sure who made a piece, do not guess a brand. Rewear does not allow anything described with a brand it was not made by, so "no label" or "unbranded" is the honest answer. Nor does it allow items made from protected species, so check before you list real fur or an exotic skin.
How do you describe vintage wear honestly?
Precisely. Say what the flaw is, where it is and how noticeable, and show it.
- Underarms: "faint discolouration under both arms, not visible when worn".
- Fold lines: fading or thinning where the piece was stored folded.
- Seams: any split stitching, especially at the seat and armholes.
- Elastic: waistbands and cuffs that have lost their stretch.
- Zips and fastenings: working, stiff, or replaced.
- Holes: size and place: "two pinholes on the back, about 1 mm each, photo 7".
- Smell: storage and smoke smells are common in older clothes. Air the piece first, and declare anything that will not shift.
On Rewear you can tag flaws such as "Fading", "Stain", "Small hole", "Has been repaired", "Zip needs attention" or "Smells of smoke or damp", and photograph each visible one close up. Then choose the grade that matches: a piece with visible wear that is still wearable is Satisfactory, not Good. For wording that is exact without putting buyers off, see our guide to describing flaws honestly.
Why do measurements matter even more for vintage?
Sizing has changed over the decades, and older pieces often come up smaller than their label suggests to a modern buyer. Older fabrics also tend to have no stretch at all, so the measurements are what a buyer actually buys on, as our guide to whether vintage sizes run small sets out.
- Give every figure the listing asks for, laid flat: chest, waist, hip and length for a dress; waist, hip and length for a skirt; chest, length, sleeve and shoulder for a jacket or coat; waist, hip, inside leg and rise for trousers. Chest is pit to pit; double the flat waist and hip, so they read the whole way round.
- Give the size exactly as the label says, not a modern equivalent. If you have compared it with a modern piece, add "measures closer to a modern UK 10" in the description.
- Add the extras that matter on fitted vintage: the width of the sleeve at the armpit, laid flat, since older sleeves can be narrow, and the length from the shoulder to the waist seam on a dress, which decides where its waist sits on the buyer.
Which photos do vintage buyers look for?
- The whole piece, front and back, on a hanger or laid flat, in daylight.
- Every label: brand, size, care and where it was made.
- The inside: the seams, the finishing and the lining.
- The fastenings, close up.
- The fabric, close up, and held up to the light to show any thin patches.
- Every flaw, each tagged and shown close up.
How should you price vintage?
Age alone does not set a price. Buyers pay for a desirable brand or designer, a sought-after era, good condition and a size people can wear. A pristine piece in a common size from a popular decade usually sells for more than a rarer one that is fragile or very small. Look at what similar pieces are listed for, and leave a little room for offers.
Our guide to buying vintage clothing lists the checks careful buyers make: run through them before you list.
Advertisement
Ready to sell?
Listing on Rewear is free and there is no selling fee, so the price you agree is the price you are paid.