Yes, usually. Many older pieces come up a size or two smaller than the same number on a modern label, and sometimes more, because sizes have drifted larger over the decades, older clothes were often cut closer to the body, and older fabrics rarely stretch. No conversion chart is reliable, since sizing changed at different rates for different brands and decades, so ignore the number on the label and compare the garment's measurements in cm with your own, leaving a little room.
Why do vintage sizes run small?
Several things have changed at once:
- Sizes have grown. Over the decades, many brands have gradually put bigger measurements behind the same size numbers, which is often called vanity sizing. A size 12 from decades ago is usually smaller than a size 12 today.
- There has never been one standard that every brand follows, then or now.
- Older clothes were often cut closer. Many mid-century dresses and jackets were made to be worn over structured underwear, so their waists in particular can be very small.
- Older fabrics rarely stretch. Elastane is in a great deal of modern clothing and gives a forgiving fit. Most older pieces have none.
- Washing takes its toll. Wool and cotton washed for decades may have shrunk a little.
- Home sewing patterns size differently. Many vintage pieces were made at home, and sewing pattern sizes have long run smaller than shop sizes with the same number.
Do all vintage clothes run small?
Not all. As a broad rule, the older and more fitted the piece, the more likely it is to run small. Pieces from the 1980s and 1990s are often roomy, with big shoulders and boxy cuts, even when the number on the label is small. Menswear labelled in inches, such as a 40-inch chest, names a body measurement, which makes it a better starting point than a dress size, though cuts and rises have changed. And a label from another country follows that country's sizes, not the UK's.
Advertisement
Why won't a conversion chart work?
A chart assumes a fixed difference between old and new sizes, and there is not one. It varies by brand, decade, country and garment, and a home-made piece follows whatever pattern it was cut from. Some older labels give a bust or hip measurement in inches rather than a size at all. A chart also cannot know how a piece is cut, or how much room it was designed to have. So use the label to narrow your search, and the tape measure to decide.
How do you convert a vintage size by measurements?
- Take your own measurements: bust, waist and hips all the way round, with a soft tape.
- Get the garment's measurements in cm, laid flat, and double any flat chest, waist or hip. On a Rewear listing, the waist and hip are already doubled; only the chest is given flat.
- Allow some room. As a rough guide from dressmaking, a close-fitting woven dress or jacket needs about 5 to 8 cm more than your bust, 2.5 to 4 cm more than your waist and 2.5 to 6.5 cm more than your hips. Looser styles need more; anything with stretch can need less.
- Better still, compare with a garment you own that fits the way you want this one to, measured the same way. Our guide to measuring clothes for buying online covers the method, and choosing a dress size by your measurements works through an example.
Then check the measurements that catch people out on older clothes:
- The shoulders, which are often narrower than on modern clothes.
- The sleeve, both its length and its width. Ask for the width of the sleeve at the armpit, laid flat, because older sleeves can be narrow and the armholes set high.
- The length from the shoulder to the waist seam, on dresses and fitted tops, since an older bodice may be cut shorter or longer than you are.
- The rise, on trousers and jeans. Older trousers often sit higher at the waist than modern ones.
What can a tailor change on vintage clothes?
- Letting out: older garments, especially home-made ones, were often sewn with generous seam allowances, so a side seam may give a centimetre or two. Ask the seller whether there is fabric folded inside the seams. Old stitch lines and fading along a seam can show where it has already been let out.
- Taking in and shortening: usually straightforward, as on modern clothes.
- Hard or impossible: narrow shoulders, high armholes, a short bodice, or adding room where there is no spare fabric.
How do you check a vintage piece's fit on Rewear?
A Rewear listing asks for figures by type, in cm: dresses take the chest, waist, hip and length, skirts the waist, hip and length, jackets and coats the chest, length, sleeve and shoulder, and trousers the waist, hip, inside leg and rise. The size on the listing is often the size on the label, so trust the centimetres over the number.
- Save your bust, waist and hips in your Rewear profile, and a measured listing tells you how it compares with you.
- Ask for anything missing, and for the extras above, in a message: "Could you measure the sleeve width at the armpit and the shoulder to waist seam, laid flat?"
- Leave a margin. A measurement within 2 cm of the listed figure counts as accurate under Rewear's Terms, and on a fitted vintage dress with no stretch, 2 cm can be the difference between doing up and not.
Our guide to buying vintage clothing covers the condition checks that go with the fit, and if you are clearing out older pieces, selling vintage clothing shows how to date and measure them for a listing. For a piece you have found elsewhere, our Will it fit? checker compares its measurements with yours.
Advertisement
Find your next piece
Second-hand clothing from sellers across the UK, with measurements in cm where sellers add them and buyer protection at checkout.