REWEAR

Fit and sizing

What is the rise on trousers and jeans? How to measure it

Rise is the distance from the crotch seam to the top of the waistband. What low, mid and high rise mean in cm, how to measure it, and how to use it.

The rise on trousers or jeans is the distance from the crotch seam to the top of the waistband, measured up the front. It tells you where the waistband will sit on your body: a short rise sits low on the hips, a long rise reaches up to or above your natural waist. To measure it, lay the trousers flat, find the point where the leg seams meet at the crotch, and measure straight up to the top of the front waistband.

Rise is the measurement most people never check, and it explains a lot of fit problems that a waist size alone cannot.

Why rise matters

Two pairs of jeans can have the same waist and inside leg and still fit completely differently, because the waistband sits in a different place.

  • Too short a rise for you, and the waistband digs in, gapes at the back when you sit, or feels as if it is slipping down.
  • Too long a rise, and the waistband sits higher than you expect, with spare fabric in the seat or front.

And because your body is a different width at your hips than at your natural waist, the rise changes which of your measurements matters. A low-rise pair sits around the hips, so it has to fit your hips more than your natural waist. A high-rise pair has to fit your natural waist.

Low, mid and high rise in cm

The words mean roughly this:

  • Low rise sits below the belly button, on the hips.
  • Mid rise sits around the belly button.
  • High rise sits at or above the natural waist.

In numbers, denim guides put women's front rises at about 18 to 22 cm (7 to 8½ in) for low rise, 20 to 25 cm (8 to 10 in) for mid rise and 25 to 30 cm (10 to 12 in) for high rise. Sources disagree at the edges, and the same style has a longer rise in a bigger size, so use the figures to read a listing, then compare with a pair you own.

How to measure the rise

  1. Do up the zip and button and lay the trousers flat, front facing up.
  2. Smooth out the front, so the fabric is flat but not stretched.
  3. Find the crotch seam, where the inside leg seams meet.
  4. Measure straight up to the top edge of the waistband at the front.
  5. Write it down in centimetres.

That is the front rise, the one listings usually give. Some people also measure a back rise, from the crotch seam up to the top of the back waistband. It is usually longer, and it matters if trousers often gape at the back when you sit.

How rise works with the other three measurements

On Rewear, jeans, trousers and shorts can list four figures, and each answers a different question:

  • Waist (taken flat and already doubled on the listing): will it do up?
  • Hip (the widest part of the seat, also already doubled): will it go on comfortably?
  • Inside leg (along the inner seam to the hem): will the length be right?
  • Rise: where will the waistband sit?

Save your own waist, hips and inside leg in your Rewear profile, and a listing with those figures tells you how it compares with you. The rise has no body measurement to compare against, so check it against your favourite pair. Our guide to buying jeans online that fit uses all four, and how trousers should fit covers the waist, seat and break.

Using rise to choose

  1. Measure the rise, waist and inside leg of the trousers you like best.
  2. Compare each listing with those numbers.
  3. Within a centimetre or so of your rise, the waistband will sit in the same place.
  4. Several centimetres more, it will sit noticeably higher; less, noticeably lower.

Tip

Between two waist sizes? Look at the rise as well. A slightly longer rise often gives a little more room at the front and seat, while a short rise with a tight waist rarely feels comfortable.

Stretch, vintage and body length

Stretch denim and jersey trousers are forgiving, so a centimetre or two matters less. Rigid denim and tailored wool have little give, so the numbers need to be closer. A seller should say if a fabric has stretch; if not, ask.

Vintage jeans and trousers are often cut with a higher rise than recent ones, and their size labels can run small, so measurements matter even more there. Our guide to why size labels differ covers the reasons. If rises are often wrong on you because of your height, our guide to petite and tall sizing explains what those ranges change.

Can a tailor change the rise?

Barely. Lowering the waistband on tailored trousers means taking it off and setting it back lower, which few tailors will do on jeans because of the pockets and rivets. A rise can never be made longer. That is why it is worth checking before you buy, while the waist and hems can usually be adjusted.

If you are selling trousers

Add the rise. It takes seconds once the trousers are laid out for the waist and inside leg, and it answers a question buyers would otherwise message to ask. Our guide to measuring clothes for selling covers every figure Rewear asks for. A hand measurement within 2 cm of the listed figure counts as accurate under Rewear's Terms, so measure carefully, but do not worry about the odd millimetre.

Find your next piece

Second-hand clothing from sellers across the UK, with measurements in cm where sellers add them and buyer protection at checkout.

See what’s for saleSell on Rewear

More from the Rewear blog