A second-hand dinner suit is a good buy when the lapel facings are clean and intact, the braid down the trousers is unfrayed, the jacket fits your shoulders and the trousers come with it. Facings and braid show wear first, so look closely at the lapel edges, the collar and the trouser hems. Check the cloth on the label, ask for the trouser measurements, which a suit listing does not include, and buy early enough to have the sleeves or hems altered before the party.
What should the lapels look like?
- Peak lapels point up towards the shoulders and are the most formal.
- A shawl collar is one smooth curve with no notch, the classic choice.
- Notch lapels have the step of an ordinary suit. Common on modern and hire suits, and fine, but less traditional.
The lapels are faced in a contrasting fabric: satin, which is shiny, or grosgrain, which is matt with fine ribs. Good suits use silk; cheaper ones use polyester satin, which looks glassier.
How do you check the facings?
The facing is the first thing to look tired, and the hardest to put right. Ask for close-ups and look for:
Advertisement
- rubbed edges on the lapels and collar, where the shine has gone or the threads are fraying
- pulls and snags in satin, which catch the light as fine lines
- marks at the collar from skin, sweat or make-up, and water spots
- bubbling, where a glued facing is lifting from the cloth beneath
- worn buttons: they are usually covered in the facing fabric, and the covering wears through to the base underneath
A tailor can replace facings, but it is skilled work, so tired facings should mean a much lower price.
What should the trousers have?
- A single stripe of braid down each outside leg, in the same fabric as the lapels. Check it is intact at the hems, where it frays first.
- No belt loops, traditionally. Instead there are side adjusters, small buckles or tabs at the waist, or buttons inside the waistband for braces. Ask whether the adjusters work and the buttons are all there.
- No turn-ups, and a plain hem that just touches the shoe with little or no break.
Make sure the jacket and trousers are sold together. On Rewear, the Men's Suits & tailoring type has a Dinner suit style you can choose in the search filters, and separate styles for a suit jacket only or suit trousers only, so read which one a listing is.
How should a dinner suit fit?
The rules are the same as for any suit:
- Shoulders: the seam at the edge of your shoulder, with no dent below it. Shoulders are the one thing a tailor cannot really change.
- Chest: buttoned, the jacket lies flat without pulling into an X.
- Length: the jacket covers your seat.
- Sleeves: long enough to show about a centimetre of shirt cuff.
- Trousers: sitting at your natural waist, cleanly over the shoe.
A Rewear listing for suits and tailoring asks the seller for four jacket measurements: chest pit to pit, length, sleeve and shoulder. Measure a jacket you like the same way and compare. Then ask for the trousers' waist, laid flat and doubled, the inside leg from the crotch seam to the hem, and the rise. Our guide to buying a second-hand suit explains each measurement and what a tailor can alter.
Rewear's Terms count a hand measurement within 2 cm of the listing as accurate, so leave a little room on the chest and waist.
What is it made of?
Ask for the composition label. A traditional dinner suit is wool, often a fine, slightly pebbly weave called barathea, or a wool and mohair blend with a soft sheen that resists creasing. Polyester is cheaper and hard-wearing, but shines under lights.
Check the colour in daylight. Black wool can fade to a brownish or greyish black, often on the shoulders first, and a jacket that has faded more than its trousers was worn or cleaned more often. Midnight blue is traditional too, and can look black under evening light.
A stock number or barcode label stitched inside the jacket or waistband often means an ex-hire suit, which may have been worn many times.
Should you hire or buy second-hand?
Hiring suits a one-off: everything comes together and it is cleaned afterwards. But you pay each time, and the fit is only as good as the sizes on the shelf.
Buying second-hand costs once. You can have the sleeves and hems altered so it fits properly, and it is ready for every do after this one. If black tie comes round most years, buying usually comes out ahead, and you can sell it on when you no longer need it.
Buying the shirt, bow tie or cummerbund from the same seller as a bundle means you pay postage once, and any bundle discount the seller offers comes off automatically.
When should you buy for Christmas?
Early. Sellers have up to 5 days to post an order, and a tailor may need a week or more for sleeves and hems in December. When it arrives, try the jacket and trousers on together before you confirm delivery in the app: confirming pays the seller, and anything not as described should be reported on the order within 14 days of delivery.
Hang it straight away and steam out the creases from the parcel, keeping the steamer well back from silk facings. Our guide to getting creases out without an iron shows how.
The short version
Choose your lapel style, then check the facings, covered buttons and trouser braid, since they wear first. Get the shoulders right, ask for the trouser measurements, and check the cloth and colour in daylight. Buy early enough for alterations, and if black tie comes round every year, buy rather than hire.
Advertisement
Find your next piece
Second-hand clothing from sellers across the UK, with measurements in cm where sellers add them and buyer protection at checkout.