REWEAR

Buying

Buying a second-hand Barbour or waxed jacket: what to check

Sizes and styles, the wear points to check in photos, what re-waxing can and cannot fix, how to date a Barbour, and what to ask before you buy one used.

A second-hand Barbour or other waxed jacket is a good buy when the cotton is whole at the cuffs, collar and pocket edges, the zip and studs work, the lining is clean, and the measurements leave room for a jumper. A dry, patchy finish is not a fault: waxed cotton is meant to be re-waxed, and you can do it at home. Tears, mildew, a musty smell and machine washing are the things to price in or walk away from.

Bedale, Beaufort or Border: pick by length

Barbour's three best-known waxed jackets differ mainly in length, so the model name tells you a lot.

  • Bedale: the shortest, first made in 1980 as a riding jacket. Good for cycling and driving.
  • Beaufort: a little longer, added in 1983, with a large game pocket across the back.
  • Border: the longest, with longer sleeves and a roomier cut, for walking in the rain.

Get the size right

Men's Barbour waxed jackets are usually sized by chest in inches: a 40 is made for a chest of about 40 inches (102 cm), and the jacket itself measures more, to leave room for layers. Women's are usually in UK dress sizes. The garment's own measurements matter more than either.

On Rewear, a seller listing a jacket or coat is asked for four: chest pit to pit, length, sleeve and shoulder. Measure a jacket you already wear the same way, laid flat, and compare. Double the pit-to-pit figure for the chest all the way round. Waxed cotton does not stretch, so a narrow shoulder pulls when you reach, and with a jumper on the cuff should still cover your wrist bone. If a listing has no measurements, ask. Our guide on how a winter coat should fit explains how much room to leave.

The wear points to check in the photos

Waxed cotton wears in the same places on almost every jacket. Ask for close-ups of any the listing does not show.

  • Cuffs and collar edges: fraying and thin patches at the fold.
  • The corduroy collar: flattened cord is normal with age; a hole means a new collar.
  • Pocket openings and flaps, where hands go in and out.
  • Elbows and the back hem, where creasing and sitting cause cracks.
  • Underarm seams, for split stitching.

Then the hardware. Ask whether the zip runs smoothly: a stiff one can often be freed, as our guide to fixing a stuck zip shows, but missing teeth mean a new zip. Check every stud closes, look for stains or tears in the lining, and if the style had a detachable hood, ask whether it is included.

On Rewear, sellers can tag flaws such as a small hole, a repair or a zip that needs attention; each should have a close-up, so ask if one is missing.

What re-waxing fixes, and what it cannot

A pale, dry jacket has simply lost wax, and that is easy to put right. Stand an open tin of wax dressing in hot water for about 20 minutes until it is liquid, work it into the cotton with a cloth, going over seams and folds twice, and leave the jacket to dry overnight somewhere warm. Barbour suggests re-waxing about once a year, and its own repair service re-waxes, cleans and repairs its jackets, cuffs and collars included.

Re-waxing does not fix tears, which need a patch; mildew, grey or white spots with a musty smell from a jacket put away damp; or cracks that go right through the cotton.

Watch out

Waxed cotton should never go in a washing machine or tumble dryer, or be washed with soap or warm water. A machine-washed jacket will have lost its wax and may be damaged, so ask how it has been cleaned.

Is it genuine, and how old is it?

Ask for clear photos of the main label, the care label and the hardware. Genuine Barbour jackets usually carry the brand name on the studs and zip pulls, with neat, even label stitching. No single sign proves a jacket is real, so read our guide to spotting fake designer clothes before paying for anything expensive.

The royal warrants on older labels give a rough age. Barbour received its first in 1974, its second in 1982 and its third in 1987, so one crest suggests 1974 to 1982, two crests 1982 to 1987, and three 1987 or later. Labels were not always changed straight away, so treat it as a guide. Some classic jackets say Made in England, but plenty of genuine Barbour is made elsewhere.

A fair price, and what to ask

Style, size, condition and the last re-wax set the price. A jacket that needs wax, a stud or a patch should cost less than one in perfect order, and the condition grade should match the photos: Very good means worn with no flaws, Good minor signs of wear, Satisfactory visible wear, such as a dry finish and worn cuffs. If it needs work, an offer that allows for it is fair.

Before you buy, message the seller from the listing and ask:

  1. When was it last re-waxed, and has it ever been machine washed?
  2. Where has it been stored, and does it smell of anything but wax?
  3. Do the zip and every stud work, and is the hood included?

When it arrives

Try it on over a jumper before you confirm delivery in the app, since confirming releases the seller's payment. If something is wrong that the listing did not show, open a problem report on the order within 14 days of delivery.

The short version

Pick the style by length, measure with room for a jumper, and check cuffs, collar, pockets, elbows, zip, studs and lining. A dry finish can be re-waxed at home; tears, mildew and machine washing are bigger problems, so price them in.

Find your next piece

Second-hand clothing from sellers across the UK, with measurements in cm where sellers add them and buyer protection at checkout.

See what’s for saleSell on Rewear

More from the Rewear blog